Towner Down Tension Bar Gold

Description

“The Original Down Tension Bar”

We're huge fans of Towner components for these reasons:

• fit a BIGSBY® vibrato to your guitar with no drilling for mounting points, preserving the integrity of your guitar
• typical Gibson style guitars earth / ground the strings through the stop bar to prevent hum. The ingenious simplicity of Towner systems means that the Towner bar earths the strings with no extra drilling or rewiring
• they are low profile meaning your case should still fit the guitar
• they look great

The TOWNER Down Tension Bar manages your sustain controlling your break angle. The TOWNER Down Tension Bar is designed to work with the BIGSBY® B3 or BIGSBY® B6 (recommended for ES guitar models) vibrato tailpieces.

Mounted to the stop tailpiece studs in place of the stop tailpiece, the studs provide the ability to raise or lower the TOWNER Down Tension Bar. Controlling how much downward tension you want on your strings, therefore, managing your guitar strings sustain.

This simple function is ideal and becomes a custom setup for every player with a BIGSBY® vibrato tailpiece because every guitar setup is different. From the gauge of the strings the players likes to use to the action of the strings, type and height of the bridge and type of nut.

*NOTE – CHECK WIDTH of STUD NECK POST:

Measure the neck width of your studs, they should be NO wider than 0.265 inches, if they are wider than 0.265 inches you will need to purchase different tailpiece mounting studs. Gibson Memphis reissues and Gibson reissues sometimes have wider neck posts, measure to be sure.

See TOWNER store here for replacements with proper neck post width.

(*The TOWNER Down Tension Bar is designed to fit the neck width of stock GIBSON Guitar stud posts.)