Towner Replacement METRIC Tailpiece Mounting Studs (NO ANCHORS) Gold

Description

To fit the cuffs on the TOWNER Down Tension Bar, the stop tailpiece studs should be no wider than 0.265 inches at the neck (see “G” in image below). These are Metric Replacement Stop Tailpiece Studs to fit Towner systems if you're studs dont conform to above diagram. Most studs (other than Gibson’s stock studs) have wider neck posts and are METRIC.

• Sold as a pair
• Metric tailpiece mounting studs
• Made in the USA
• Plated steel studs
• Mounting studs with METRIC M8 x 1.25 threads
• Fits many European & Far Eastern guitars(e.g. Epiphone) and components (e.g. Schaller)
• Overall Length is 1 3/8″ and threaded section is slightly under 7/8″
• Fits tailpiece with ears thickness of 5/16″(8mm) and under(please check before ordering)

  See our TOWNER store here for METRIC & IMPERIAL stud replacements with proper neck post width.